Italian ship Anteo (A 5309)
Anteo A 5309 | |
History | |
---|---|
Italy | |
Name: | Anteo |
Builder: | Cantiere Navale Ernesto Breda, Marghera, (Venezia) |
Laid down: | 20 July 1977 |
Launched: | 11 November 1978 |
Commissioned: | 31 July 1980 |
In service: | 1 |
Homeport: | La Spezia |
Identification: |
|
Motto: | In undis per undas pro vita |
Status: | Active |
General characteristics | |
Type: | submarine rescue ship |
Displacement: | 3,874 tonnes (full-load).[1] |
Length: | 98.4 m (322 ft 10 in) |
Beam: | 15.8 m (51 ft 10 in) |
Draught: | 6.5 m (21 ft 4 in) |
Propulsion: |
|
Speed: | 20 knots (37 km/h; 23 mph) |
Range: |
|
Complement: | 141 |
Sensors and processing systems: | 2 x GEM Elettronica navigation radars AN/SPN-748[3] |
Armament: | 2 × Oerlikon 20/70 mm or Browning M2HB 12,7 mm |
Notes: |
|
Anteo (A 5309) is a submarine rescue ship of the Italian Navy, assigned to Raggruppamento Subacquei ed Incursori "Teseo Tesei" (COMSUBIN).[4] ITS Anteo is the third ship to bear this name in the Italian Navy. The ship’s design was developed by the "Ufficio Navi Speciali del Reparto Progetti Navi" (Special Office of the Ships Projects Division), according to the guidelines provided by the Navy General Staff. The ship was built at Cantiere Navale Breda di Porto Marghera and commissioned to the Italian Navy on 31 July 1980.
Characteristics
@media all and (max-width:720px){.mw-parser-output .mobile-float-reset{float:none!important;width:100%!important}}.mw-parser-output .stack-container{box-sizing:border-box}.mw-parser-output .stack-clear-left{float:left;clear:left}.mw-parser-output .stack-clear-right{float:right;clear:right}.mw-parser-output .stack-left{float:left}.mw-parser-output .stack-right{float:right}.mw-parser-output .stack-object{margin:1px;overflow:hidden}
It is fitted with:[5]
- SDC system for submarine rescue up to 250 m deep[6]
- SRC Submarine Rescue Chamber: Mc-Cann rescue bell, for submarine rescue up to 120 m deep;[7] height: 4 m, diameter: 2,20 m, displacement 9,5 tonnes, 6 survivors per cycle;
- DRASS Galeazzi SRV-300 deep-submergence rescue vehicle[8] for submarine rescue up to 300 m deep; 12 survivors per cycle;[9] length overall 8.46 m, width overall 3.13 m, height (without skirt) 3.17 m, displacement 27.3 tonnes (since 1980 and until 2002 was used Breda MSM-1S USEL deep-submergence rescue vehicle);
- 3 x hardsuit atmospheric diving suit (ADS) systems of Oceanworks International for submarine rescue up to 300 m deep[10]
- 1 x SAAB Seaeye Falcon ROV
- 1 x Gaymarine Pluto ROV
- 1 x hull mounted Konsberg Simrad EM 1002 multi beam sonar[11]
- 1 x DRASS Galeazzi compression chamber for 12 persons
- 2 x DRASS Galeazzi compression chambers for 6 and 3 persons
See also
deep-submergence rescue vehicle DRASS Galeazzi SRV-300
deep-submergence rescue vehicle Breda MSM-1S USEL
- COMSUBIN
References
^ http://www.marina.difesa.it/conosciamoci/editoria/notiziario/Documents/2016/giugno/unico.pdf
^ http://www.marina.difesa.it/EN/thefleet/ships/Pagine/Anteo.aspx
^ http://www.navypedia.org/naval_balance/italy.htm
^ http://www.marina.difesa.it/uominimezzi/navi/Pagine/Anteo.aspx
^ http://traktoria.org/files/.../ATP-57(B)_The_Submarine_Search_and_Rescue_Manual.pdf
^ http://www.marina.difesa.it/uominimezzi/navi/Pagine/Salvataggio.aspx
^ http://www.marina.difesa.it/formazione-in-marina/formazione_specialistica/ilgos/gruperativo/comnavin/Pagine/Campana.aspx
^ http://www.ismerlo.org/assets/Italia/srv_300.htm
^ http://www.marina.difesa.it/formazione-in-marina/formazione_specialistica/ilgos/gruperativo/comnavin/Pagine/Minisottomarino.aspx
^ http://www.marina.difesa.it/formazione-in-marina/formazione_specialistica/ilgos/gruperativo/Pagine/ADS.aspx
^ http://www.marinelink.com/news/324017
Wikimedia Commons has media related to Anteo (A 5309). |
Comments
Post a Comment