Tinsley Marshalling Yard

See also: Sheffield district rail rationalisation plan of the 1960s

Tinsley Yard and the railways of Sheffield (2005)

Tinsley Marshalling Yard was a railway marshalling yard, used to separate railway wagons, located near Tinsley in Sheffield, England. It was opened in 1965 as a part of a major plan to rationalise all aspects of the rail services in the Sheffield area, and closed in stages from 1985 with the run-down of rail freight in Britain. It was also the site of Tinsley Traction Maintenance Depot (TMD), which was closed in 1998.^[1] At its peak, 200 locomotives were allocated to this depot.

As of 2011 an intermodal (road-rail) freight terminal Sheffield International Rail Freight Terminal (SIRFT) is located on part of the site (built late 2000s). A set of sidings is operated by DB Schenker Rail (UK) serving the nearby Outokumpu steel works.

Contents

• 
  1 History
  
  
  
  • 
    1.1 The yard
    
  
  
  • 
    1.2 Decline
    
  
  
  
  


• 
  2 Post hump yard, 2000-
  
  
  
  • 
    2.1 Sheffield International Rail Freight Terminal
    
  
  
  
  


• 
  3 See also
  


• 
  4 References
  


• 
  5 Further reading
  


• 
  6 External links
  

History

In 1961, a tenth of the rail-borne freight in Britain originated in the Sheffield district.^[2] However, as with many areas, the provision of freight facilities had grown through cramped, piecemeal developments associated with the various operating companies that built Britain's rail system. With the region being one of the main heavy industry heartlands of Britain, government money was made available to remedy this situation. Central economic planning and economic self-sufficiency were government policy; the situation was seen as a major limit on Britain's economic growth.^{[citation needed]}

The Sheffield district rail rationalisation plan of the 1960s called for the replacement of the majority of the marshalling yards in the Sheffield area with one large yard. A location on the Sheffield District line was chosen and work started in 1963 with new connections being built at Treeton, Broughton Lane and Tinsley South.The 80 yard Tinsley Wood Tunnel and approach cuttings were filled with some of the material excavated from the new yard, the remaining material being transported to a tip at Oregreaves. The location allowed easy access to the brand new central Sheffield Freight Terminal at Grimesthorpe, and the new Freightliner terminal on the site of the Masborough Sorting Sidings in Rotherham, one of the many yards that Tinsley replaced.^[3]

The locomotive depot opened in 1964, with diesel locomotives moving in from a temporary home in the old Grimesthorpe steam locomotive depot and Darnall diesel (former electric locomotive) depot, Darnall Steam locomotive depot being closed to become a wagon-repair depot. Other steam locomotive depots at Millhouses and Canklow were closed and the last steam locomotives based in the Sheffield area were scrapped, along with many redundant sidings dotted about the area.

The Tinsley complex was opened by Dr Richard Beeching, former Chairman of the British Railways Board, on 29 October 1965.^[4]

The yard

Tinsley Yard (1982)

From its outset, Tinsley was to be a "Network Yard": a major railfreight node where wagon-load freight trains would arrive, be split and resorted into new trains for onward departure to other Network yards, directly to the many rail-connected businesses in the area in "trip" freights, or to the Freight Terminal for unloading and forwarding by road. To assist with this, it featured gravity-assisted shunting and a new computerised system of wagon control, along the lines of large US rail freight yards.

At the time of opening, the yard was handling 3,000 wagons a day. Incoming trains were split in the 11 reception sidings, propelled over the hump in the yard, from where the individual wagons rolled down a slope and were automatically sorted into new trains on the Yard's 50 main sorting sidings. The yard even had its own dedicated class of shunting locomotive (British Rail Class 13) for this purpose as BR's standard class of shunting locomotive was not powerful enough for use in the yard.^[1] Each of the main sorting sidings was fitted with computer-controlled retarders to either slow the rolling wagons down before they hit other wagons already on the siding, or give wagons rolling too slowly a boost to move them along to the correct position in a particular siding. This wagon-control system, manufactured by Dowty, was very complex, needed almost constant maintenance, and crucially could not handle longer wheelbase wagons, which were already becoming more prevalent and required individual shunting. There was an express freight and departure yard of 10 sidings, and a 25 road secondary yard for local freight trains (with its own hump).

The Manchester-Sheffield-Wath electrification was extended into the yard in 1965^[5] to allow electrically-hauled trains to the Manchester area to be handled. Seventeen miles of track from Woodburn Junction and Darnall Junction via Broughton Lane to the Reception Sidings at Catcliffe were electrified at 1500 V DC. The insulators were capable of being used at 6.25 kV AC if ever required, with the option of 25 kV AC with minimal conversion costs.^[6] Unlike similar electrified marshalling yards, to save on costs the main body of the sorting sidings was not electrified: a half of the arrival sidings was electrified for incoming electric trains; departing electric trains either had to use the southern third of the main sorting sidings (the western part of which were wired for electric trains) or had to be drawn out of the main sorting sidings by diesel locomotives into electrified departure roads where the electric locomotives were attached.

Decline

Tinsley Yard (2005)

From an early stage the yard was not used at capacity: by the late 1960s road competition was biting hard into the railways' goods traffic, and in particular the wagon-load freight that required hump-yards like Tinsley was already declining. The economic malaise and industrial decline of the 1970s exacerbated this. By the 1980s British Rail was closing its remaining wagon-load freight facilities as being uneconomic.

In 1981 the electrification was removed with the closure of the Manchester-Sheffield-Wath system.

On 17 December 1984^[7] the arrival sidings and hump were closed, the wagon-control system removed and the remaining Class 13s scrapped. The under-utilised Grimesthorpe Freight Terminal was severely damaged by a major fire on 14 December 1984 and was relegated to being a steel-loading facility. The yard connections were relaid to allow easier handling of block-load trains which now dominated rail freight in Britain. By 1995 the decline in British heavy industry meant that this type of traffic had also declined massively, resulting in the closure of the locomotive depot on 27 March 1998.^[8] The eastern connections (both North and South facing chords) to the Midland 'Old Road' had been closed in 1993 however the track is still in situ, and the western connection to the Midland Main Line (and goods depot at Grimesthorpe) at Brightside junction was lifted in 1999. Both chords to the ex MSLR/GCR line from Woodburn to Rotherham (via Broughton Lane junc and Tinsley South junc) remain open. The rest of the yard progressively fell into disuse over the next ten years.

A few years later only the main sorting sidings remained: a part of these were to be used to stable steel trains destined for the Sheffield area, the rest of the remaining sidings were used to store surplus-to-requirements rolling stock in a poor state of repair. However, in 2007 the remaining sidings were lifted and a new, much smaller yard laid, additionally a new rail-linked distribution and goods transshipment centre - Sheffield International Rail Freight Terminal (SIRFT) was constructed.

Post hump yard, 2000-

In 2006 the sidings at Tinsley reached the national news when Daniel Matthews, an engineering apprentice, took to the site and joyrode a Class 08 shunting engine up and down the tracks.^[9]

In 2008 EWS operated the sidings at Tinsley.^[10][11] As of 2011 the DB Cargo UK yard handles steel for Avesta Sheffield (now part of Outokumpu).^[12]

Sheffield International Rail Freight Terminal

53°24′16″N 1°23′29″W / 53.40454°N 1.39132°W / 53.40454; -1.39132 (Sheffield International Rail Freight Terminal)

In the mid-2000s, land adjacent to the northwestern area of the former yard was used for the construction of the Sheffield International Rail Freight Terminal (SIRFT). The terminal consists of two warehouses of approximately 30,000 m² (320,000 sq ft).^[13] SIRFT is rail connected with through connections southwards and northwards, and is equipped to deal with conventional and containerised wagon loads.^[10]

A third rail connected warehousing unit (of up to approximately 25,000 m² (270,000 sq ft)) has approval for construction (as of 2011).^[14] In 2017 it was reported that the loading gauge had been increased to the W10 standard to allow the facility to handle 2.9 m (9 ft 6 in) Hi-Cube containers.^[15]

See also

• 
  Sheffield City Airport - former airport located just south of the marshalling yard

References

1. 
   ^ ^ab "Class 13 Tinsley Shunters". Rail Express. No. 233. October 2015. p. 25. ISSN 1362-234X..mw-parser-output cite.citation{font-style:inherit}.mw-parser-output q{quotes:"""""""'""'"}.mw-parser-output code.cs1-code{color:inherit;background:inherit;border:inherit;padding:inherit}.mw-parser-output .cs1-lock-free a{background:url("//upload.wikimedia.org/wikipedia/commons/thumb/6/65/Lock-green.svg/9px-Lock-green.svg.png")no-repeat;background-position:right .1em center}.mw-parser-output .cs1-lock-limited a,.mw-parser-output .cs1-lock-registration a{background:url("//upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Lock-gray-alt-2.svg/9px-Lock-gray-alt-2.svg.png")no-repeat;background-position:right .1em center}.mw-parser-output .cs1-lock-subscription a{background:url("//upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Lock-red-alt-2.svg/9px-Lock-red-alt-2.svg.png")no-repeat;background-position:right .1em center}.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration{color:#555}.mw-parser-output .cs1-subscription span,.mw-parser-output .cs1-registration span{border-bottom:1px dotted;cursor:help}.mw-parser-output .cs1-hidden-error{display:none;font-size:100%}.mw-parser-output .cs1-visible-error{font-size:100%}.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration,.mw-parser-output .cs1-format{font-size:95%}.mw-parser-output .cs1-kern-left,.mw-parser-output .cs1-kern-wl-left{padding-left:0.2em}.mw-parser-output .cs1-kern-right,.mw-parser-output .cs1-kern-wl-right{padding-right:0.2em}
   


2. 
   ^ Third Rail Report, Sheffield Freight (Motion picture). British Transport Films. 1961.
   


3. 
   ^ Shannon, Paul (2014). Speedlink. Hersham: Ian Allan. p. 33. ISBN 978-0-7110-3697-0.
   


4. 
   ^ Haigh, Alan; Joy, David (1979). Yorkshire Railways. Clapham: Dalesman Books. p. 43. ISBN 0-85206-553-1.
   


5. 
   ^ "From The Railway Magazine Archives - 50 Years Ago". The Railway Magazine. Vol. 161 no. 1370. May 2015. p. 108.
   


6. 
   ^ Cooke, B.W.C., ed. (May 1965). "Tinsley Yard nearing completion". Railway Magazine. Vol. 111 no. 769. London: Tothill Press. p. 295.
   


7. 
   ^ Slater, John, ed. (March 1985). "Tinsley features end". Railway Magazine. Vol. 131 no. 1007. Sutton, Surrey: Transport Press. p. 143. ISSN 0033-8923.
   


8. 
   ^ Pigott, Nick, ed. (May 1998). "The end of the line for Tinsley TMD". The Railway Magazine. Vol. 144 no. 1165. London: IPC. p. 55. ISSN 0033-8923.
   


9. 
   ^ "Train buff in locomotive joyride". BBC News. BBC. 5 July 2006. Retrieved 29 January 2013.
   


10. 
    ^ ^ab "SIRFT - First for road & rail - Rail freight access & operations" (PDF). www.heliosproperties.com. November 2008. Retrieved 28 January 2013.
    


11. 
    ^ "The 2008 Network Statement - Connected Facilities Details" (PDF). Network Rail. Retrieved 7 January 2012.
    


12. 
    ^ Cleland, Ian (November 2011). "Rail Served Metal Products Handling Locations (Version 1)". Network Rail. Retrieved 7 January 2012.
    


13. 
    ^ "Sheffield International Rail Freight Terminal, SIRFT, Sheffield, S1". www.novaloca.com. Archived from the original on 16 February 2012. Retrieved 28 January 2013.
    


14. 
    ^ "SIRFT3 – A joint venture scheme between Peveril Securities and Sladen Estates". portal.cbre.eu. Retrieved 7 January 2012.
    


15. 
    ^ "SIRFT Sheffield - Distribution Facilities for the Logistics Market, Sheffield | Rail". www.sirftsheffield.com. Retrieved 5 December 2017.
    

.mw-parser-output .refbegin{font-size:90%;margin-bottom:0.5em}.mw-parser-output .refbegin-hanging-indents>ul{list-style-type:none;margin-left:0}.mw-parser-output .refbegin-hanging-indents>ul>li,.mw-parser-output .refbegin-hanging-indents>dl>dd{margin-left:0;padding-left:3.2em;text-indent:-3.2em;list-style:none}.mw-parser-output .refbegin-100{font-size:100%}

• 
  Baker, Stuart K. (May 2001) [1977]. Rail Atlas Great Britain & Ireland (9th ed.). Hersham: Oxford Publishing Co. p. 56, section B2. ISBN 0-86093-553-1. 0105/H.
  


• 
  Pixton, Bob (2001). North Midland, Portrait of a Famous Route: Part Two: Chesterfield-Sheffield-Rotherham. Cheltenham: Runpast. ISBN 1-870754-51-4.
  

Further reading

• 
  Rhodes, Dr. Michael (January 1986). "Tinsley - All change for the future". Rail Enthusiast. No. 52. EMAP National Publications. pp. 10–14. ISSN 0262-561X. OCLC 49957965.
  

External links

Wikimedia Commons has media related to Tinsley Yard, Sheffield.

• 
  "SIRFT Sheffield - Distribution Facilities for the Logistics Market, Sheffield - SIRFT". www.sirftsheffield.com. Retrieved 28 January 2013.
  


• 
  "Our Developments :: Helios Properties - SIRFT". www.heliosproperties.com. Retrieved 28 January 2013.
  


• 
  "Sirft3 - Video brochure". www.sirft3.co.uk. Retrieved 7 January 2012.
  

Coordinates: 53°23′55.1″N 1°22′51.2″W / 53.398639°N 1.380889°W / 53.398639; -1.380889

This page is only for reference, If you need detailed information, please check here